Input Coupling |
DC, AC or GND |
Input Impedance |
1 MΩ±1% |
Input Capacitance |
17 pF ± 3 pF |
Probe Attenuation Coefficient |
0.0001X, 0.0002X, 0.0005X, 0.001X, 0.002X, 0.005X, 0.01X, 0.02X, 0.05X, 0.1X, 0.2X, 0.5X, 1X, 2X, 5X,
10X, 20X, 50X, 100X, 200X, 500X, 1000X, 2000X, 5000X, 10000X, 20000X, and 50000X |
Maximum Input Voltage |
CAT I 300 Vrms, 400 Vpk, Transient Overvoltage 1600 Vpk |
Vertical Resolution |
8 bits |
Vertical Sensitivity Range |
500 μV/div~10 V/div |
Offset Range |
±1 V (500 μV/div~50 mV/div)
±30 V (51 mV/div~260 mV/div)
±100 V (265 mV/div~10 V/div) |
Dynamic Range |
±5 div (8 bits) |
Bandwidth Limit (Typical) |
20 MHz, 100 MHz, 200 MHz; selectable for each channe |
DC Gain Accuracy |
± 3% of full scale |
DC Offset Accuracy |
<200 mV/div (±0.1 div±2 mV±1.5% of offset value) >200 mV/div (±0.1 div±2 mV±1.0% of offset value) |
Channel-to-Channel Isolation |
40 dB, from DC to maximum rated bandwidth of each model |
ESD Tolerance |
±8 kV (on input BNCs) |
Vertical System Digital Channel |
|
Number of Channels |
16 input channels (D0~D15)
(D0~D7, D8~D15) |
Threshold Range |
±15.0 V, in 10 mV step |
Threshold Accuracy |
±(100 mV + 3% of the threshold setting) |
Threshold Selection |
TTL(1.4 V), COMS5.0(2.5 V), COMS3.3(1.65 V), COMS2.5(1.25 V), COMS1.8(0.9 V), ECL(-1.3 V),
PECL(3.7 V), LVDS(1.2 V), 0.0 V
User (adjustable threshold for 8 channels in a group) |
Max. Input Voltage |
± 40 V peak CAT I; transient overvoltage 800 Vpk |
Max. Input Dynamic Range |
±10 V + threshold |
Minimum Voltage Swing |
500 mVpp |
Input Impedance |
About 101 kΩ |
Probe Load |
≈8 pF |
Vertical Resolution |
1 bit |
Horizontal System Analogue Channel |
|
Time Base Resolution |
10 ps |
Time Base Accuracy |
±10 ppm ± 10 ppm/year |
Time Base Delay Range |
before triggering: ≥1/2 screen width
after triggering: 1 s or 100 div, whichever is greater |
Time Interval (â–³T)
Measurement |
±(1 sample interval) ± (2 ppm×readout)±50 ps |
Inter-channel Offset Correction Range |
±100 ns |
Horizontal Mode |
YT: Default
XY X = Channel 1, Y = Channel 2
SCAN: Time base ≥200 ms/div, available to enter or exit the SCAN mode by rotating the Horizontal SCALE knob
ROLL: Time base ≥200 ms/div, available to enter or exit the ROLL mode by rotating the Horizontal SCALE knob
(enable the auto ROLL mode at first) |
Horizontal System Digital Channel |
|
Min. Detectable Pulse Width |
5ns |
Maximum Input Frequency |
200 MHz (accurately copied as the sine wave of the maximum frequency of the logic square wave;
input amplitude is the minimum swing; the shortest the ground cable is required for the logic probe) |
Inter-channel Time Delay |
2 ns (typical), 5 ns (maximum) |
Trigger System |
|
Trigger Source |
Analogue channel (1~4), digital channel (D0~D15), AC Line |
Trigger Mode |
Auto, Normal, Single |
Trigger Coupling |
DC: DC coupling trigger
AC: AC coupling trigger
High Frequency Rejection: High frequency rejection, cut-off frequency~55 kHz (internal only)
Low Frequency Rejection: Low frequency rejection, cut-off frequency~55 kHz (internal only) |
Noise Rejection |
Increase delay for the trigger circuit (internal only), On/Off |
Holdoff Range |
8 ns to 10 s |
Trigger Bandwidth |
Analogue bandwidth |
Trigger Sensitivity |
1 div or 5 mVpp, whichever is larger, <10mV/div
0.5 div, ≥10mV/div
Enable the noise rejection, with trigger sensitivity reducing half |
Trigger Level
Range |
Internal: ± 5 div from the center of the screen
AC Line Fixed 50% |
General Specifications |
|
Power Voltage |
100 V-240 V, 45 Hz-440 Hz |
Power |
Max. 75 W (connect to various interfaces, USB) |
Fuse |
4 A, T degree, 250 V |
Temperature Range |
Operating 0℃~+50℃
Non-operating -30℃~+70℃ |
Humidity Range |
Operating:
Below +30℃: ≤90% RH (without condensation)
+30℃ to +40℃, ≤75% RH (without condensation)
+40℃ to +50℃, ≤45% RH (without condensation)Non-operating Below 65℃: ≤90% RH (without condensation) |
Altitude |
Operating Below 3,000
Non-operating Below 15,000 |
LCD |
9-inch capacitive multi-touch screen/gesture enabled operation |
Resolution |
1024×600 (Screen Region) |
Graticule |
(10 vertical divisions) x (8 horizontal divisions) |
Persistence |
Off, Infinite, variable persistence (100 ms to 10 s) |
Brightness |
256 intensity levels (LCD,HDMI) |
Reviews
There are no reviews yet.