| Input Coupling | DC, AC or GND |
| Input Impedance | 1 MΩ±1% |
| Input Capacitance | 17 pF ± 3 pF |
| Probe Attenuation Coefficient | 0.0001X, 0.0002X, 0.0005X, 0.001X, 0.002X, 0.005X, 0.01X, 0.02X, 0.05X, 0.1X, 0.2X, 0.5X, 1X, 2X, 5X,
10X, 20X, 50X, 100X, 200X, 500X, 1000X, 2000X, 5000X, 10000X, 20000X, and 50000X |
| Maximum Input Voltage | CAT I 300 Vrms, 400 Vpk, Transient Overvoltage 1600 Vpk |
| Vertical Resolution | 8 bits |
| Vertical Sensitivity Range | 500 μV/div~10 V/div |
| Offset Range | ±1 V (500 μV/div~50 mV/div)
±30 V (51 mV/div~260 mV/div)
±100 V (265 mV/div~10 V/div) |
| Dynamic Range | ±5 div (8 bits) |
| Bandwidth Limit (Typical) | 20 MHz, 100 MHz, 200 MHz; selectable for each channe |
| DC Gain Accuracy | ± 3% of full scale |
| DC Offset Accuracy | <200 mV/div (±0.1 div±2 mV±1.5% of offset value) >200 mV/div (±0.1 div±2 mV±1.0% of offset value) |
| Channel-to-Channel Isolation | 40 dB, from DC to maximum rated bandwidth of each model |
| ESD Tolerance | ±8 kV (on input BNCs) |
| Vertical System Digital Channel | |
|---|
| Number of Channels | 16 input channels (D0~D15)
(D0~D7, D8~D15) |
| Threshold Range | ±15.0 V, in 10 mV step |
| Threshold Accuracy | ±(100 mV + 3% of the threshold setting) |
| Threshold Selection | TTL(1.4 V), COMS5.0(2.5 V), COMS3.3(1.65 V), COMS2.5(1.25 V), COMS1.8(0.9 V), ECL(-1.3 V),
PECL(3.7 V), LVDS(1.2 V), 0.0 V
User (adjustable threshold for 8 channels in a group) |
| Max. Input Voltage | ± 40 V peak CAT I; transient overvoltage 800 Vpk |
| Max. Input Dynamic Range | ±10 V + threshold |
| Minimum Voltage Swing | 500 mVpp |
| Input Impedance | About 101 kΩ |
| Probe Load | ≈8 pF |
| Vertical Resolution | 1 bit |
| Horizontal System Analogue Channel | |
|---|
| Time Base Resolution | 10 ps |
| Time Base Accuracy | ±10 ppm ± 10 ppm/year |
| Time Base Delay Range | before triggering: ≥1/2 screen width
after triggering: 1 s or 100 div, whichever is greater |
Time Interval (△T)
Measurement | ±(1 sample interval) ± (2 ppm×readout)±50 ps |
| Inter-channel Offset Correction Range | ±100 ns |
| Horizontal Mode | YT: Default
XY X = Channel 1, Y = Channel 2
SCAN: Time base ≥200 ms/div, available to enter or exit the SCAN mode by rotating the Horizontal SCALE knob
ROLL: Time base ≥200 ms/div, available to enter or exit the ROLL mode by rotating the Horizontal SCALE knob
(enable the auto ROLL mode at first) |
| Horizontal System Digital Channel | |
|---|
| Min. Detectable Pulse Width | 5ns |
| Maximum Input Frequency | 200 MHz (accurately copied as the sine wave of the maximum frequency of the logic square wave;
input amplitude is the minimum swing; the shortest the ground cable is required for the logic probe) |
| Inter-channel Time Delay | 2 ns (typical), 5 ns (maximum) |
| Trigger System | |
|---|
| Trigger Source | Analogue channel (1~4), digital channel (D0~D15), AC Line |
| Trigger Mode | Auto, Normal, Single |
| Trigger Coupling | DC: DC coupling trigger
AC: AC coupling trigger
High Frequency Rejection: High frequency rejection, cut-off frequency~55 kHz (internal only)
Low Frequency Rejection: Low frequency rejection, cut-off frequency~55 kHz (internal only) |
| Noise Rejection | Increase delay for the trigger circuit (internal only), On/Off |
| Holdoff Range | 8 ns to 10 s |
| Trigger Bandwidth | Analogue bandwidth |
| Trigger Sensitivity | 1 div or 5 mVpp, whichever is larger, <10mV/div
0.5 div, ≥10mV/div
Enable the noise rejection, with trigger sensitivity reducing half |
Trigger Level
Range | Internal: ± 5 div from the center of the screen
AC Line Fixed 50% |
| General Specifications | |
|---|
| Power Voltage | 100 V-240 V, 45 Hz-440 Hz |
| Power | Max. 75 W (connect to various interfaces, USB) |
| Fuse | 4 A, T degree, 250 V |
| Temperature Range | Operating 0℃~+50℃
Non-operating -30℃~+70℃ |
| Humidity Range | Operating:
Below +30℃: ≤90% RH (without condensation)
+30℃ to +40℃, ≤75% RH (without condensation)
+40℃ to +50℃, ≤45% RH (without condensation)Non-operating Below 65℃: ≤90% RH (without condensation) |
| Altitude | Operating Below 3,000
Non-operating Below 15,000 |
| LCD | 9-inch capacitive multi-touch screen/gesture enabled operation |
| Resolution | 1024×600 (Screen Region) |
| Graticule | (10 vertical divisions) x (8 horizontal divisions) |
| Persistence | Off, Infinite, variable persistence (100 ms to 10 s) |
| Brightness | 256 intensity levels (LCD,HDMI) |
Rigol MSO5000 Datasheet 
Reviews
There are no reviews yet.