Knowledge Base:  

Knowledge Base : performance
Page of 1
How do I check my DSA is working properly?
Follow these instructions showing you how to do some quick checks on performance. You'll know what performance to expect. They start with a handy factory reset and calibrate.
I just received mine… how can I tell if it's working OK?
First follow the procedure for Factory Reset. Then check the noise performance is as it should be. You will need a carefuly sequence of settings for this… use the quick video tip on our RIGOL pages.
What about RIGOL battery and portable use? Can you run RIGOL Scopes and Spectrum Analysers from Battery or portable UPS Power Supplies?
Running the DSA815 from a battery (see also comment about other instruments) Although the size and weight of the DSA800's make it attractive for use in locations where there is no pow
RIGOL 3GHz Spectrum Analyser - Applications insights from RIGOL-UK's customers.
1. Simple modulation testing above UHF. First I get straight on with monitoring typical modulation sidebands, I’m at 2,320MHz with DSA1030A-TG3 - a performance spectrum analyser from RIGOL incor
Which oscilloscope probe is best for my application
Selecting the correct oscilloscope probe is very important for making quality measurements. If the probe performance is not adequate or if you did not select the proper probe for your application, you