Knowledge Base:  

Page of 1
EMC Precompliance: Testing on a budget
EMC Precompliance: Testing on a budget Date:29.05.2012 Solution: Almost any electronic design slated for commercial use is subject to EMC (Electromagnetic Compatibility) testing. Any company int
RIGOL 3GHz Spectrum Analyser - Applications insights from RIGOL-UK's customers.
1. Simple modulation testing above UHF. First I get straight on with monitoring typical modulation sidebands, I’m at 2,320MHz with DSA1030A-TG3 - a performance spectrum analyser from RIGOL incor
How to get the specified DANL of -135dBm? (typ, +6dB f/GHz)
A simple sequence of settings will help you dig into the noise floor. With any Spectrum Analyser, setting up the (1) Span, (2) Attenuator, (3) Pre-amp and (4) Resolution Bandwidth settings - these are
How do I achieve the lowest DANL with my spectrum analyser?
Set your DSA as follows: Attenuator = 0dB; Preamplifier ON; Center Frequency = 10MHz; RBW = 10Hz; Span = 10KHz. This is a typical procedure for all professional analysers.