Knowledge Base:  
Knowledge Base > DSA800 series --> Knowledge Base > DSA800 series
How to measure an RF Amplifier using a DSA-800 Series Spectrum Analyzer
Last Updated: 04/11/2013
How to measure an RF Amplifier  using a DSA-800 Series Spectrum Analyzer


Solution: This document provides step-by-step instructions on using the Rigol DSA-800 series of Spectrum Analyzers to measure the characteristics of an RF Amplifier.

In addition to the DSA-800 Spectrum Analyzer, you will need an RF Source, cabling, and adapters.

Measure the amplifier

1. Connect the RF generator output to the RF input of the instrument using the appropriate cabling and connectors.

NOTE: If your instrument is equipped with a Preamplifier, you can enable it to lower the displayed noise floor by pressing the following sequence:

Press AMP button > Down Arrow > RF Preamp On
Figure 1: Preamplifier off

Figure 2: Preamplifier on

2. You can use the Auto button to center and zoom on the waveform. You can also use the Freq and Span buttons to manually manipulate the displayed data.


• Another option to center the waveform is to press Freq button > Peak → CF. This will automatically align the center of the display with the peak of the trace.

3. Freeze the unamplified trace by pressing Trace > Trace Type > Freeze. You can use the Marker button to create a marker. This can be used to find the peak frequency and amplitude of the displayed waveform.

4. Disable the RF Generator output.

5. Disconnect RF generator from the instrument RF Input and connect it to the Amplifer input.

6. Connect the Amplifier output to the instrument RF Input.

7. Enable the RF generator.

8. Enable a second trace to visualize the amplified signal by pressing the Trace button > Select Trace 2.
9. Set the trace type to Clear/Write by pressing Trace > Type > Clear/Write. 10.You can use the Auto button or manually center the trace using the Freq,
Span, and Amp buttons.

11. Readjust the amplitude scale by pressing Amp > Auto

12. You can enable an additional marker for the new trace by pressing Marker > Select the marker you would like to use

13. Now, select the trace you want to mark by pressing Marker > Marker Trace
> select trace of interest

• Be sure Normal is selected to enable the marker


14. You can also enable a marker table by pressing Marker > Down Arrow > Mkr Table ON. This allows a convenient way to compare markers and values between traces.


15. Alternately, you can use the Trace Math function to create a Trace difference on the screen.

16. Enable Trace Math by pressing Trace > Trace Math

17. Set Function to A-B

18. Set A = T1

19. Set B = T2

20. Set Operate > On

21. Set Amplitude by pressing AMPL > Auto

NOTE: New trace appears. This represents Trace 1 – Trace 2.

22. Set Marker to Math Trace by pressing Marker > select Marker 3 23.Set Marker Trace to Math by pressing Marker > Marker Trace > Math

23.Set Marker Trace to Math by pressing Marker > Marker Trace > Math


• You can then move the marker to the smoothest portion of Trace 3

• You can then move the marker to the smoothest portion of Trace 3.

Was this article helpful?


Related Articles
 > Is there an attenuator built-in on RIGOL's DSA815?
 > Are there any independent reviews of RIGOL Spectrum Analysers like DSA815 in the UK?
 > How do I add a horizontal Display Line to my DSA screen?
 > How to reduce or lower noise floor? (DSA815 and DSA1030)
 > How to get the specified DANL of -135dBm? (typ, +6dB f/GHz)
 > How do I check my DSA is working properly?
 > How do radio amateurs use RIGOL's DSA815? And for what kinds of applications?
 > I just received mine… how can I tell if it's working OK?
 > Can I get help on using complex functions of my instrument?
 > Can I get help with programming my instrument?
 > Will I get a UK phone number for the team who sold to me?
 > EMC Precompliance: Testing on a budget
 > How do I measure an RF Bandpass filter
 > How do I connect my instrument via my LAN to UltraSigma PC Software?
 > After receiving my instrument(s), what should I do with my RIGOL Warranty Card?
 > Can I get Rigol firmware updates?
 > When installing Ultra Sigma I get a message PC telling me to install NIVISA / VISA Runtime engine. What am i doing wrong?
 > What about RIGOL battery and portable use? Can you run RIGOL Scopes and Spectrum Analysers from Battery or portable UPS Power Supplies?
 > USB stick / flash drive / memory sticks must fully compliant with USB2.0* standard compliant w/Win7 - Info on good sticks, esp. earlier models:
 > RIGOL 3GHz Spectrum Analyser - Applications insights from RIGOL-UK's customers.
 > Getting started with Rigol PC Software Tools
 > AMK: What do you get with the DSA Advanced Measurement Kit ? (DSA1000-AMK)
 > Using a Rigol product key to generate a Rigol software licence code.
 > Rigol PC Software Summary
 > Rigol PC Software Versions
 > Can I get IVI drivers for my Rigol test equipment?