Knowledge Base:  
Knowledge Base > DC Power Supplies --> Knowledge Base > DC Power Supplies
Can I get help with programming my instrument?
Last Updated: 23/12/2013
RIGOL provides drivers and programming functions as part of your warranted and purchased package. Programming itself can be achieved in many different ways with tools which are largely the choice of the customer. For this reason, we can't support your systems but we can sometimes help you find information - we ask you to first review the programming guide for your instrument and make sure it is successfully connected to your computer system and then if a fault is found in the way the instrument responds to commands we can feedback and ask if there might be warranty support available, or a UK person to assist, subject to your terms of purchase.

Was this article helpful?

Comments:
 

Related Articles
 > Is there an attenuator built-in on RIGOL's DSA815?
 > Is there an attenuator built-in on RIGOL's DSA1030?
 > Are there any independent reviews of RIGOL Spectrum Analysers like DSA815 in the UK?
 > How do I add a horizontal Display Line to my DSA screen?
 > How to reduce or lower noise floor? (DSA815 and DSA1030)
 > How to get the specified DANL of -135dBm? (typ, +6dB f/GHz)
 > How do I check my DSA is working properly?
 > How do radio amateurs use RIGOL's DSA815? And for what kinds of applications?
 > I just received mine… how can I tell if it's working OK?
 > What is the default password for DS2000 LXI settings pages
 > Can I get help on using complex functions of my instrument?
 > Will I get a UK phone number for the team who sold to me?
 > How do I achieve the lowest DANL with my spectrum analyser?
 > How to measure an RF Amplifier using a DSA-800 Series Spectrum Analyzer
 > Which oscilloscope probe is best for my application
 > EMC Precompliance: Testing on a budget
 > How do I measure an RF Bandpass filter
 > Is logging software included with RIGOL DM-series multimeters? What rate does it capture my readings to PC?
 > How do I connect my instrument via my LAN to UltraSigma PC Software?
 > After receiving my instrument(s), what should I do with my RIGOL Warranty Card?
 > How can I use Ultra Sigma to grab data from my RIGOL Scope? E.g. CSV file for viewing in Excel?
 > Can I get Rigol firmware updates?
 > What file formats does RIGOL use for storage of waveforms etc? What is the different between Trace and Waveform?
 > When installing Ultra Sigma I get a message PC telling me to install NIVISA / VISA Runtime engine. What am i doing wrong?
 > What about RIGOL battery and portable use? Can you run RIGOL Scopes and Spectrum Analysers from Battery or portable UPS Power Supplies?
 > RIGOL scope has a message on screen saying WAIT (in green). All channels ON but I see no signal being displayed. Is this effect to do with triggering?
 > RIGOL DG4062 Wave generator simulates heartbeat, for life-saving pacemaker medical technology... with help of RIGOL-UK's Team Telonic Instruments Ltd.
 > USB stick / flash drive / memory sticks must fully compliant with USB2.0* standard compliant w/Win7 - Info on good sticks, esp. earlier models:
 > X-Y Display mode on Scopes - additional features with RIGOL DS1000Z-series oscilloscope (DS1074, DS1074Z-S, DS1104Z, DS1104Z-S)
 > RIGOL 3GHz Spectrum Analyser - Applications insights from RIGOL-UK's customers.
 > Getting started with Rigol PC Software Tools
 > AMK: What do you get with the DSA Advanced Measurement Kit ? (DSA1000-AMK)
 > test
 > How do i measure an RF Attenuator?
 > Using a Rigol product key to generate a Rigol software licence code.
 > Rigol PC Software Summary
 > Rigol PC Software Versions
 > Can I get IVI drivers for my Rigol test equipment?