Clearance: Rigol MSO5152-E 150MHz, 2Ch, 4GSa/s Digital Oscilloscope, Old Stock 10% Discount, 2 Years Warranty
£806.00 (£967.20 inc. VAT)
2 in stock
Availability: Stock models delivered next working day (UK only) for orders placed before 16:30 (Mon - Fri)
| Vertical System Analogue Channel | |
|---|---|
| Input Coupling | DC, AC or GND |
| Input Impedance | 1 MΩ±1% |
| Input Capacitance | 17 pF ± 3 pF |
| Probe Attenuation Coefficient | 0.0001X, 0.0002X, 0.0005X, 0.001X, 0.002X, 0.005X, 0.01X, 0.02X, 0.05X, 0.1X, 0.2X, 0.5X, 1X, 2X, 5X, 10X, 20X, 50X, 100X, 200X, 500X, 1000X, 2000X, 5000X, 10000X, 20000X, and 50000X |
| Maximum Input Voltage | CAT I 300 Vrms, 400 Vpk, Transient Overvoltage 1600 Vpk |
| Vertical Resolution | 8 bits |
| Vertical Sensitivity Range | 500 μV/div~10 V/div |
| Offset Range | ±1 V (500 μV/div~50 mV/div) ±30 V (51 mV/div~260 mV/div) ±100 V (265 mV/div~10 V/div) |
| Dynamic Range | ±5 div (8 bits) |
| Bandwidth Limit (Typical) | 20 MHz, 100 MHz, 200 MHz; selectable for each channel |
| DC Gain Accuracy | ± 3% of full scale |
| DC Offset Accuracy | <200 mV/div (±0.1 div±2 mV±1.5% of offset value) >200 mV/div (±0.1 div±2 mV±1.0% of offset value) |
| Channel-to-Channel Isolation | 40 dB, from DC to maximum rated bandwidth of each model |
| ESD Tolerance | ±8 kV (on input BNCs) |
| Vertical System Digital Channel | |
| Number of Channels | 16 input channels (D0~D15) (D0~D7, D8~D15) |
| Threshold Range | ±15.0 V, in 10 mV step |
| Threshold Accuracy | ±(100 mV + 3% of the threshold setting) |
| Threshold Selection | TTL(1.4 V), COMS5.0(2.5 V), COMS3.3(1.65 V), COMS2.5(1.25 V), COMS1.8(0.9 V), ECL(-1.3 V), PECL(3.7 V), LVDS(1.2 V), 0.0 V User (adjustable threshold for 8 channels in a group) |
| Max. Input Voltage | ± 40 V peak CAT I; transient overvoltage 800 Vpk |
| Max. Input Dynamic Range | ±10 V + threshold |
| Minimum Voltage Swing | 500 mVpp |
| Input Impedance | About 101 kΩ |
| Probe Load | ≈8 pF |
| Vertical Resolution | 1 bit |
| Horizontal System Analogue Channel | |
| Time Base Resolution | 10 ps |
| Time Base Accuracy | ±10 ppm ± 10 ppm/year |
| Time Base Delay Range | before triggering: ≥1/2 screen width after triggering: 1 s or 100 div, whichever is greater |
| Time Interval (△T) Measurement | ±(1 sample interval) ± (2 ppm×readout)±50 ps |
| Inter-channel Offset Correction Range | ±100 ns |
| Horizontal Mode | YT: Default XY X = Channel 1, Y = Channel 2 SCAN: Time base ≥200 ms/div, available to enter or exit the SCAN mode by rotating the Horizontal SCALE knob ROLL: Time base ≥200 ms/div, available to enter or exit the ROLL mode by rotating the Horizontal SCALE knob (enable the auto ROLL mode at first) |
| Horizontal System Digital Channel | |
| Min. Detectable Pulse Width | 5ns |
| Maximum Input Frequency | 200 MHz (accurately copied as the sine wave of the maximum frequency of the logic square wave; input amplitude is the minimum swing; the shortest the ground cable is required for the logic probe) |
| Inter-channel Time Delay | 2 ns (typical), 5 ns (maximum) |
| Trigger System | |
| Trigger Source | Analogue channel (1~4), digital channel (D0~D15), AC Line |
| Trigger Mode | Auto, Normal, Single |
| Trigger Coupling | DC: DC coupling trigger AC: AC coupling trigger High Frequency Rejection: High frequency rejection, cut-off frequency~55 kHz (internal only) Low Frequency Rejection: Low frequency rejection, cut-off frequency~55 kHz (internal only) |
| Noise Rejection | Increase delay for the trigger circuit (internal only), On/Off |
| Holdoff Range | 8 ns to 10 s |
| Trigger Bandwidth | Analogue bandwidth |
| Trigger Sensitivity | 1 div or 5 mVpp, whichever is larger, <10mV/div 0.5 div, ≥10mV/div Enable the noise rejection, with trigger sensitivity reducing half |
| Trigger Level Range | Internal: ± 5 div from the center of the screen AC Line Fixed 50% |
| General Specifications | |
| Power Voltage | 100 V-240 V, 45 Hz-440 Hz |
| Power | Max. 75 W (connect to various interfaces, USB) |
| Fuse | 4 A, T degree, 250 V |
| Temperature Range | Operating 0℃~+50℃ Non-operating -30℃~+70℃ |
| Humidity Range | Operating Below +30℃: ≤90% RH (without condensation) +30℃ to +40℃, ≤75% RH (without condensation) +40℃ to +50℃, ≤45% RH (without condensation)Non-operating Below 65℃: ≤90% RH (without condensation) |
| Altitude | Operating Below 3,000 Non-operating Below 15,000 |
| LCD | 9-inch capacitive multi-touch screen/gesture enabled operation |
| Resolution | 1024×600 (Screen Region) |
| Graticule | (10 vertical divisions) x (8 horizontal divisions) |
| Persistence | Off, Infinite, variable persistence (100 ms to 10 s) |
| Brightness | 256 intensity levels (LCD,HDMI) |
Note*
Specifications are liable to change. For the full list of Specifications, please see the products datasheet located under the ‘Documentation’ tab.
Only logged in customers who have purchased this product may leave a review.
Related products
- Sale!
Clearance: Rigol DG831 35MHz Single-Channel Function / Arbitrary Waveform Generator
Original price was: £306.00.£260.00Current price is: £260.00. (£312.00 inc. VAT)3 in stock
Availability: Stock models delivered next working day (UK only) for orders placed before 16:30 (Mon - Fri)
Add to basket - Sale!
Rigol DS7024 4CH, 200MHz, 10GSa/s Digital Oscilloscope (Clearance two years warranty)
Original price was: £2,527.00.£2,147.95Current price is: £2,147.95. (£2,577.54 inc. VAT)2 in stock
Availability: Stock models delivered next working day (UK only) for orders placed before 16:30 (Mon - Fri)
Add to basket -
Rigol DG1062Z 60MHz Function / Arbitrary Waveform Generator
£379.00 (£454.80 inc. VAT)2 in stock (can be backordered)
Availability: Stock models delivered next working day (UK only) for orders placed before 16:30 (Mon - Fri)
Add to basket - Sale!
Rigol DSA705 500MHz Spectrum Analyser (Clearance)
Original price was: £837.00.£646.00Current price is: £646.00. (£775.20 inc. VAT)1 in stock
Availability: Stock models delivered next working day (UK only) for orders placed before 16:30 (Mon - Fri)
Add to basket
Reviews
There are no reviews yet.