What will my unit come with as standard?

July 2020 – Page 2 – Rigol UK

Home / 2020 / July (Page 2)

Archive for July, 2020

What will my unit come with as standard?

Posted on: July 16th, 2020 by James

July 16, 2020
All Rigol units will come with a UK Power Cable, PDI & Safety Test as standard. All other Standard Accessories will be dependant on the products that was purchased....

Can I get help with programming my instrument?

Posted on: July 16th, 2020 by James

July 16, 2020
RIGOL provides drivers and programming functions as part of your warranted and purchased package. Programming itself can be achieved in many different ways with tools which are largely the choice of the customer. For this reason, we can't support your systems but we can sometimes help you find information - we ask you to first review the programming guide for your instrument and make sure it is su...

What file formats does RIGOL use for storage of waveforms etc? What is the different between Trace and Waveform?

Posted on: July 16th, 2020 by James

July 16, 2020
To access, on oscilloscopes for example, press [Storage] to select the desired storage type. The default is “Picture”. The storage and recall descriptions of each type are as follows, with the examples in this case taken from as DS2000-series oscilloscope (so other instruments such as DG-series won't offer everything below): 1. Traces Save the waveform data in external memory in “*.tr...

USB stick / flash drive / memory sticks must fully compliant with USB2.0* standard compliant w/Win7 – Info on good sticks, esp. earlier models:

Posted on: July 16th, 2020 by James

July 16, 2020
We have found many instruments to be fussy about USB sticks (more common on instruments of slightly longer-standing design). Like PictBridge standard, USB memory specs can be quite open to interpretation and may vary between manufacturers. Please try the following guidelines if you are having difficulty - it is especially important you can rely on the stick you have chosen, if you decide to do ...

X-Y Display mode on Scopes – additional features with RIGOL DS1000Z-series oscilloscope (DS1074, DS1074Z-S, DS1104Z, DS1104Z-S)

Posted on: July 16th, 2020 by James

July 16, 2020
New DS1000Z series offers more in X-Y mode: In this mode, the Rigol DS1074Z oscilloscope changes 2 of the 4 channels from voltage-time display mode to voltage-voltage display mode. The phase deviation between two signals with the same frequency can be easily measured via Lissajous method. The figure below shows the measurement schematic diagram of the phase deviation. To access the Lissajou ...

Getting started with Rigol PC Software Tools

Posted on: July 16th, 2020 by James

July 16, 2020
Rigol software files are downloaded in .rar data containers or .zip compressed files. The files must be unpacked or unzipped before installation. Ultra Sigma must be installed before any other Rigol application, except Ultra Wave. To open a Rigol software application after installation (excluding S1210, S1220, S1501 and Ultra Wave)... Open Ultra Sigma > Conn...

How do I connect my instrument via my LAN to UltraSigma PC Software?

Posted on: July 16th, 2020 by James

July 16, 2020
First of all, ensure your instrument as the option for LAN connection and ensure you have a PC running the latest version of UltraSigma download from RIGOL and this PC is successfully connected to the same local area network as you're plugging your instrument into. In order for you to connect your Rigol equipment via LAN you must: Ensure your instrument is connected through the LAN...

Can I get Rigol firmware updates?

Posted on: July 16th, 2020 by James

July 16, 2020
Yes - You can download the latest official Rigol firmware, without the need to register, from the Rigol China website. Please note... All attempts to upgrade the firmware outside of Telonic Instruments is done entirely at the owners' risk and is not covered by the warranty. Telonic Instruments recommends the use of a UPS throughout the firmware update process. ...

How do I measure an RF Bandpass filter

Posted on: July 15th, 2020 by James

July 15, 2020
How to measure an RF Bandpass filter using a DSA815TG Spectrum Analyzer Solution: This document provides step-by-step instructions on using the Rigol DSA-800 series of Spectrum Analyzers to measure the characteristics of an RF Bandpass filter. NOTE: The DSA must have a Tracking Generator to effectively perform the following test. Normalize the trace (Optional) Many elements in an RF sign...

How do I contact you?

Posted on: July 15th, 2020 by James

July 15, 2020
Please click here for our company contact information....

Sub Categories

Blog (29)

Electronic Load Support (3)

EMC Support (3)

General Product Support (3)

Multimeters Support (3)

News (7)

Oscilloscope Support (5)

Power Supply Support (3)

Product Support (43)

RF Signal Generator Support (3)

Special Offers (12)

Spectrum Analyser Support (5)

Waveform Generator Support (3)