CONTACT ACCOUNT

TEL: 0118 978 6911

Home / Product Support / Spectrum Analyser Support

Spectrum Analyser Support

How Do I Achieve The Lowest DANL With My Spectrum Analyser?

Posted on: July 24th, 2020 by James

July 24, 2020
Set your DSA as follows: Attenuator = 0dB; Preamplifier ON; Center Frequency = 10MHz; RBW = 10Hz; Span = 10KHz. This is a typical procedure for all professional analysers....

What will my unit come with as standard?

Posted on: July 16th, 2020 by James

July 16, 2020
All Rigol units will come with a UK Power Cable, PDI & Safety Test as standard. All other Standard Accessories will be dependant on the products that was purchased....

How do I connect my instrument via my LAN to UltraSigma PC Software?

Posted on: July 16th, 2020 by James

July 16, 2020
First of all, ensure your instrument as the option for LAN connection and ensure you have a PC running the latest version of UltraSigma download from RIGOL and this PC is successfully connected to the same local area network as you're plugging your instrument into. In order for you to connect your Rigol equipment via LAN you must: Ensure your instrument is connected through the LAN...

Can I get Rigol firmware updates?

Posted on: July 16th, 2020 by James

July 16, 2020
Yes - You can download the latest official Rigol firmware, without the need to register, from the Rigol China website. Please note... All attempts to upgrade the firmware outside of Telonic Instruments is done entirely at the owners' risk and is not covered by the warranty. Telonic Instruments recommends the use of a UPS throughout the firmware update process. ...

How do I measure an RF Bandpass filter

Posted on: July 15th, 2020 by James

July 15, 2020
How to measure an RF Bandpass filter using a DSA815TG Spectrum Analyzer Solution: This document provides step-by-step instructions on using the Rigol DSA-800 series of Spectrum Analyzers to measure the characteristics of an RF Bandpass filter. NOTE: The DSA must have a Tracking Generator to effectively perform the following test. Normalize the trace (Optional) Many elements in an RF sign...