Home > Software Licences >

Rigol AMK-DSA800 Advanced Measurement Kit Licence
Rigol AMK-DSA800 Advanced Measurement Kit Licence

Rigol AMK-DSA800




 

Rigol AMK-DSA800
Advanced Measurement Kit Licence

Our Price: £423.00 (507.60 inc VAT)





Quantity in our UK Stock.:
(Out of Stock-Click to be notified when in stock)


Availability: Obtained to order - Usually ships same day or next working day.
Product Code: DSA800-AMK

Description Documents, Software & Videos
 

A Rigol AMK-DSA800 Advanced Measurement Kit licence permanently enables the following advanced measurement functions on Rigol DSA700 series and Rigol DSA800 series spectrum analysers: T-Power (Time domain Power), ACP (Adjacent Channel Power), Chan Pwr (Channel Power), OBW (Occupied Bandwidth), EBW (Emission Bandwidth), C/N Ratio, Harmo Dist (Harmonic Distortion) and TOI (Third-Order Intermodulation). The measurement mode can be single or continuous and the measurement status can be controlled: Restart, Pause or Resume.

The advanced measurement functions are accessed via the 'Meas' button on the front panel. Press 'Meas Fctn' to access the advanced measurement functions. The screen will be divided into two windows: The upper window will display the sweep trace and the lower window will display the measurement results.

Each licence contains a unique product key. The product key is used to generate a software licence code that must be entered into your instrument. To generate a Rigol software licence code using your Rigol product key, please see HERE. Installed software licence codes are permanent - They are unaffected by Rigol firmware updates.

For further information, please click on the 'DOCUMENTS, SOFTWARE & VIDEOS' tab, above.

Features
  • T-Power (Time Domain Power): The system enters zero span mode and calculates the power within a time period specified by the user. The types of powers available include Peak, Average and RMS.
  • ACP (Adjacent Channel Power): Measures the power of the main channel and adjacent channels as well as the power difference between the main channel and each of the adjacent channels. When this function is enabled, the span and resolution bandwidth of the analyser are adjusted to smaller values automatically.
  • Chan Pwr (Channel Power): Measures the power and power spectral density within the channel bandwidth specified by the user. When this function is enabled, the span and resolution bandwidth are automatically adjusted to smaller values.
  • OBW (Occupied Bandwidth): Calculates the OBW based upon the power ratio specified by the user (e.g. 95%) and the total power measured within the span. The OBW function also displays the offset between the center frequency of the signal under measurement and the center frequency of the analyser.
  • EBW (Emission Bandwidth): Calculates the bandwidth of the signal (the EBW) at various levels below the signal peak (the highest point in the span), as specified by the user (e.g. -10dB below peak).
  • C/N Ratio: Measures the carrier power and the noise power within bandwidths specified by the user. Displays the carrier power, the noise power and the carrier-to-noise ratio.
  • Harmo Dist (Harmonic Distortion): Measures the power of each harmonic (up to the 10th order) and THD (total harmonic distortion) of the carrier. The power of the fundamental must be greater than -50dBm, else the measurement will be invalid.
  • TOI (Third-Order Intermodulation): Measures the third-order intercept point for two signals with the same amplitude and similar frequency. Displays the frequencies and amplitudes of both signals, both third-order products and the values of both third-order intercept points.

Share your knowledge of this product. Be the first to write a review »