Total Power: 200W/350W
Current: 40A/60A
Highest Frequency: 30kHz
Current Slope: 5A/MicroS

Output: 30V/5A or 50V/3A
Programming Accuracy: 10mV/10mA

Output Per Channel: 30V/3A
Programming Accuracy: 1mV/1mA

Frequency: 1.5GHz ~ 3.6GHz
Amplitude Accuracy: <0.5dB Phase Noise: <-112dBc/Hz

Frequency: 6.5GHz ~ 13.6GHz
Amplitude Accuracy: <0.5dB Typical Phase Noise: <-116dBc/Hz

1/2 Channels
Frequency: 10MHz ~ 35MHz
Sample Rate: 125MSa/s

2 Channels
Frequency: 50MHz ~ 100MHz
Sample Rate: 250MSa/s

2 Channels
Frequency: 25MHz ~ 60MHz
Sample Rate: 200MSa/s

2 Channels
Frequency: 50MHz ~ 100MHz
Sample Rate: 250MSa/s

2 Channels
Frequency: 60MHz ~ 200MHz
Sample Rate: 500MSa/s

Frequency: 100kHz ~ 1GHz
SSB Phase Noise: <-80dBc/Hz DANL (Pre-Amp On): <-155dBm/Hz

Frequency: 9kHz ~ 7.5GHz
SSB Phase Noise: <-80/90/98dBc/Hz DANL (Pre-Amp On): <-155/158/161dBm/Hz

Frequency: 9kHz ~ 4.5GHz
SSB Phase Noise: <-102dBc/Hz typ. DANL (Pre-Amp On): <-161dBm/Hz

Frequency: 9kHz ~ 4.5GHz
SSB Phase Noise: <-102dBc/Hz typ. DANL (Pre-Amp On): <-161dBm/Hz

Frequency: 9kHz ~ 4.5GHz
SSB Phase Noise: <-102dBc/Hz typ. DANL (Pre-Amp On): <-161dBm/Hz

Frequency: 9kHz ~ 6.5GHz
SSB Phase Noise: <-108dBc/Hz typ. DANL (Pre-Amp On): <-165dBm/Hz

Frequency: 9kHz ~ 6.5GHz
SSB Phase Noise: <-108dBc/Hz typ. DANL (Pre-Amp On): <-165dBm/Hz

Frequency: 30MHz ~ 300MHz/1GHz
Nominal Impedance: 50Ω
Maximum Continuous Input RF Power: 2W / 100W

Frequency Ranges:
100kHz ~ 1GHz
9kHz ~ 7.5GHz
9kHz ~ 4.5GHz
9kHz ~ 3GHz
9kHz ~ 6.5GHz

Tent Dimensions: 120x60x60cm or 86x49x45cm
Attenuation: ~50…70dB in the range Dc to 6GHz
Bag Dimensions: 105x60cm or 70x40cm
Attenuation: ~50dB in the range DC to 2GHz

TBOH01: 100kHz ~ 110MHz
TBLC08: 9kHz ~ 30MHz
TBL5016-1: 9kHz ~ 100MHz
TBML01: 30kHz ~ 110MHz
TBL0550-1: 100kHz ~ 150MHz

The Probes serve to locate and identify potential sources of interference within the building blocks of electronic assemblies

RF Cables including RG58, RG316U, RG223 and RG142.
BNC, N-Type, SMA, SMB

Tekbox RF Current Monitoring Probes

TBTC0: 390x100x62mm
TBTC1: 390x200x108mm
TBTC2: 636x300x205mm
TBTC3: 1038x501x305mm

Atten & JBC Soldering Irons with a variety of Tips and Heaters

Circuit Board mounting testing solutions for Soldering, inspection and Hands-Free measurements