Specification:
Input / Output: 50 Ohm, N female
Supply Voltage range: 110 V…240 V
Supply power consumption: 108 W @ 220V
Operating temperature range: -20°C to 50°C
Frequency range: 100 kHz – 250 MHz
Small signal gain: 47 dB typ.
Gain flatness 100 kHz – 250 MHz / Pin = -3 dBm: 3.5 dB typ.
Saturated output power @ 100 kHz / Pin = 0 dBm: 44.1 dBm (25.7 W) typ.
Saturated output power @ 150 kHz / Pin = 0 dBm: 44.6 dBm (28.8 W) typ.
Saturated output power @ 500 kHz / Pin = 0 dBm: 45.1 dBm (32.4 W) typ.
Saturated output power @ 1 MHz / Pin = 0 dBm: 45.3 dBm (33.9 W) typ.
Saturated output power @ 10 MHz / Pin = 0 dBm: 45.3 dBm (33.9 W) typ.
Saturated output power @ 50 MHz / Pin = 0 dBm: 45.6 dBm (36.3 W) typ.
Saturated output power @ 80 MHz / Pin = 0 dBm: 46.6 dBm (45.7 W) typ.
Saturated output power @ 100 MHz / Pin = 0 dBm: 46.5 dBm (44.7 W) typ.
Saturated output power @ 150 MHz / Pin = 0 dBm: 44.5 dBm (28.2 W) typ.
Saturated output power @ 200 MHz / Pin = 0 dBm: 43.8 dBm (24 W) typ.
Saturated output power @ 230 MHz / Pin = 0 dBm: 44.9 dBm (30.9 W) typ.
Saturated output power @ 250 MHz / Pin = 0 dBm: 44.8 dBm (30.2 W) typ.
1dB output compression point @ 100 kHz: +43.7 dBm typ. (Pin: -5 dBm)
1dB output compression point @ 150 kHz: +44.1 dBm typ. (Pin: -4 dBm)
1dB output compression point @ 500 kHz: +44.6 dBm typ. (Pin: -3 dBm)
1dB output compression point @ 1 MHz: +45 dBm typ. (Pin: -3 dBm)
1dB output compression point @ 10 MHz: +45 dBm typ. (Pin: -2 dBm)
1dB output compression point @ 50 MHz: +45.6 dBm typ. (Pin: 1 dBm)
1dB output compression point @ 80 MHz: +46.5 dBm typ. (Pin: 1 dBm)
1dB output compression point @ 100 MHz: +46.5 dBm typ. (Pin: 0 dBm)
1dB output compression point @ 150 MHz: +42.9 dBm typ. (Pin: -4 dBm)
1dB output compression point @ 200 MHz: +42.2 dBm typ. (Pin: -4 dBm)
1dB output compression point @ 230 MHz: +44.1 dBm typ. (Pin: -3 dBm)
1dB output compression point @ 250 MHz: +43 dBm typ. (Pin: -4 dBm)
2nd harmonic, 100 MHz, Pout=46dBm: < – 12 dBc typ.
2nd harmonic, 100 MHz, Pout=40dBm: < – 15 dBc typ.
3rd harmonic, 100 MHz, Pout=46dBm: < – 22 dBc typ.
3rd harmonic, 100 MHz, Pout=40dBm: < – 22 dBc typ.
TOTAL HARMONIC DISTORTION
17.7% @100MHz, Pout=37dBm typ.
19.6% @100 MHz, Pout=40 dBm typ.
22.1% @100 MHz, Pout=43 dBm typ.
26.9% @100 MHz, Pout=46 dBm typ.
Third order output intercept point: +51 dBm, @100 MHz, ∆ f = 2MHz, typ.
Internal modulation frequency AM: 1 kHz ±20%
Internal modulation frequencies PM: 1 kHz ±20%, 217 Hz ±20%
Duty cycle, PM: 50% ±10% @ 1 kHz; 12.5% ±20% @ 217 Hz
MAXIMUM RATINGS
Maximum input power: +3 dBm
The output of the TBMDA-CDN25 is quite tolerant to output mismatch, however open or shorted load is not recommended, as it potentially can cause damage to the output transistor. When driving near field probes, current probes or any load of unknown impedance, it is highly recommended to insert a ≥ 3dB attenuator at the output of the amplifier in order to protect the output stage.
Reviews
There are no reviews yet.