Knowledge Base:  
Knowledge Base > DC Power Supplies --> Knowledge Base > DC Power Supplies
Rigol PC Software Summary
Last Updated: 13/06/2018
Rigol PC Software Summary



Please note...
  1. Ultra Sigma - All Rigol PC software requires Ultra Sigma to be installed beforehand, except Ultra Wave.
  2. Trial Licences - Rigol PC software that requires a licence can be downloaded and used FREE OF CHARGE throughout a trial period (normally 15 days) except Ultra View and the S1210 EMI Pre-Compliance Software (S1210 has a 'demo' mode for trial purposes). Thereafter, the features will be locked-out. These features can be unlocked, permanently, by purchasing the appropriate licence. One licence is required per Rigol equipment.
  3. S1210 EMI Pre-Compliance SW - To use this PC software, the Rigol spectrum analyser must have an active 'EMI filter and quasi-peak detector' licence (standard on Rigol DSA1000 series and Rigol RSA5000 series, option 'EMI-DSA800' on Rigol DSA700 series, Rigol DSA800 series and Rigol RSA3000 series). However, an active 'EMI filter and quasi-peak detector' licence is NOT required for 'demo' mode.


Was this article helpful?

Comments:
 

Related Articles
 > Is there an attenuator built-in on RIGOL's DSA815?
 > Is there an attenuator built-in on RIGOL's DSA1030?
 > Are there any independent reviews of RIGOL Spectrum Analysers like DSA815 in the UK?
 > How do I add a horizontal Display Line to my DSA screen?
 > How to reduce or lower noise floor? (DSA815 and DSA1030)
 > How to get the specified DANL of -135dBm? (typ, +6dB f/GHz)
 > How do I check my DSA is working properly?
 > How do radio amateurs use RIGOL's DSA815? And for what kinds of applications?
 > I just received mine… how can I tell if it's working OK?
 > What is the default password for DS2000 LXI settings pages
 > Can I get help on using complex functions of my instrument?
 > Can I get help with programming my instrument?
 > Will I get a UK phone number for the team who sold to me?
 > How do I achieve the lowest DANL with my spectrum analyser?
 > How to measure an RF Amplifier using a DSA-800 Series Spectrum Analyzer
 > Which oscilloscope probe is best for my application
 > EMC Precompliance: Testing on a budget
 > How do I measure an RF Bandpass filter
 > Is logging software included with RIGOL DM-series multimeters? What rate does it capture my readings to PC?
 > How do I connect my instrument via my LAN to UltraSigma PC Software?
 > After receiving my instrument(s), what should I do with my RIGOL Warranty Card?
 > How can I use Ultra Sigma to grab data from my RIGOL Scope? E.g. CSV file for viewing in Excel?
 > Can I get Rigol firmware updates?
 > What file formats does RIGOL use for storage of waveforms etc? What is the different between Trace and Waveform?
 > When installing Ultra Sigma I get a message PC telling me to install NIVISA / VISA Runtime engine. What am i doing wrong?
 > What about RIGOL battery and portable use? Can you run RIGOL Scopes and Spectrum Analysers from Battery or portable UPS Power Supplies?
 > RIGOL scope has a message on screen saying WAIT (in green). All channels ON but I see no signal being displayed. Is this effect to do with triggering?
 > RIGOL DG4062 Wave generator simulates heartbeat, for life-saving pacemaker medical technology... with help of RIGOL-UK's Team Telonic Instruments Ltd.
 > USB stick / flash drive / memory sticks must fully compliant with USB2.0* standard compliant w/Win7 - Info on good sticks, esp. earlier models:
 > X-Y Display mode on Scopes - additional features with RIGOL DS1000Z-series oscilloscope (DS1074, DS1074Z-S, DS1104Z, DS1104Z-S)
 > RIGOL 3GHz Spectrum Analyser - Applications insights from RIGOL-UK's customers.
 > Getting started with Rigol PC Software Tools
 > AMK: What do you get with the DSA Advanced Measurement Kit ? (DSA1000-AMK)
 > test
 > How do i measure an RF Attenuator?
 > Using a Rigol product key to generate a Rigol software licence code.
 > Rigol PC Software Versions
 > Can I get IVI drivers for my Rigol test equipment?